Yangzhou Kaiyun Machinery Co., Ltd
ZX7550V, Variable Frequency Drilling and
Main technical parameters | ZX7550V |
|---|---|
Max.drilling diameter | 50mm |
Max.end milling width | 100mm |
Max.end milling diameter | 25mm |
Max.boring diameter | 120mm |
Max.tapping diameter | M16 |
Distance from spindle end face to table surface | 50-350mm |
Spindle speed range | V)Low speed 140-1050 rp.m High speed 280-2100 r.p.m (H) 70-1600 rp.m |
Spindle taper | IS040 |
Spindle travel | 120mm |
Table size | 800x240mm |
Table stroke | 400x230x340mm |
X axis of the table diameter | 25mm( pitch 4mm) |
Y axis of the table diameter | 28mm (pitch 4mm) |
Z axis of the table diameter | 30mm (pitch 6mm) |
Torpedo stroke | 430mm |
Vertical column with square bus of guide width | 196mm |
Overall size | 1280x1285x2080mm |
Motor power | 2.2KW (H)12.2KW () |
Machine weight(kg) | 850/1000kgs |
ZX7550V, Variable Frequency Drilling and
Features.
1.Use as milling machines and drill press
2. Easily shiftable gear drive high low two steps spindle speed.
3. Variable spindle speed control.
4. Head swivels into the horizontal level on both sided 90 degree.
5. Manual fine-feed for the spindle quill
6. With horizontal milling spindle.
7. Wotktable can be swivel +45 degree.
OEM FEATURES:
Conventional miling machine without clp or cnc control, with transmission by gears lubricated in oil, vertical head with 8variable speeds changed bv positioning levers rotations between 140 to 2100rpm, horizontal spindle with transmission byjpulleys with 9 variable speeds changed by positioning the belts with rotations between 70 to 1600rpm, both with 1S0-40cone, table with dimensions 240mm x 800mm and NR12 protection fairing with interlock key, X axis stroke 400mm, Y240mm, 2 340mm, X table spindle diameter 25mm pitch 4mm, Y spindle of the table diameter 28mm pitch 4mm, 2 spindle othe table diameter 30mm pitch 6mm, torpedo with 430mm stroke, vertical motor power 2.2kw, horizontal motor power 2.2kwvertical column with square bus of guide width 196mm. Electrical controls installed on a panel fixed to the machine head.